QE20-FP2025

The QE20-FP2025 Fibre IP Networking Module, is used alongside the QE20-FP2005 RS485 Network Module to provide a fibre optic cable networking interface for a QE20 system. The fibre network consists of two fibres (TX and RX) wired in a ring around all the QE20 panels on the network.
 
This kit can also be used as a replacement for an existing fibre module.
 
This QE-FP2025 kit is for a MULTI MODE sytem, If using a SINGLE MODE system refer to the QE-FP2024 Fibre Network Kit.
 
Each QE-FP2025 cosists of the these items mounted on the module:
* A MULTI MODE fibre switch
* A PIB for networking of QE20 information and streaming of VoIP data
* An Analogue Telephone Adaptor (ATA) for sending and receiving audio via VoIP
* A VIF for interfacing the QE20 PA (speech) and WIP audio signals to the ATA
* Looms for connection to the RS485 Network Module and PSU in the QE20
 
These downloadable manuals should be referred to for specific details on configuring, diagnosing and servicing the components included in the Fiber Network Kit:
* QE20 Fibre Networking User Manual
* Panel-Link IP Bridge User Manual
* Cisco ATA191 and ATA192 User Guide
* Cisco ATA191 and 192 Administration
* Moxa Managed Ethernet Switch User Manual
* Moxa EDS-405A-408A Installation Guide
 
Each kit contains:
1 x QE20-FP2025 Fibre IP Network Module, MULTI MODE
4 x M4 x 10mm mounting screws
1 x Installation guide