QE20-FP2005

The QE20-FP2005 RS485 Network Module is required in a networked QE20, however a second network module needs to be fitted for "joined" audio segments.
 
For a fibre optic network, one of the following network kits will also be required to match the type of fibre used:
QE-FP2024 – QE20 Fibre Network Kit – Single Mode
QE-FP2025 – QE20 Fibre Network Kit – Multi Mode
 
The RS485 Network Module provides:
* 2 x separately isolated RS485 ports with 4wire (separate TX/RX) / 2wire connections with optional earth fault supervision (in conjunction with QE20 Controller Module)
* 2 x network audio connections for speech (PA) and WIP with optional EOL supervision
* 2 x non isolated GP inputs with 4state supervision for general purpose functions
* 2 x non isolated open-collector GP outputs with optional load supervision and programmable functions
* 1 x RJ45 ethernet connector for connection to the QE20 Controller Module
* 1 x TTL serial port for connection to the PIB in the optional Fibre Network Module
* PA & WIP audio connections to the VIF module in the optional Fibre Network Module
* 1 x QEComms port for connection to the VIF module in the optional Fibre Network Module
* WIP audio chain left & right connections to WIP/Input Modules & Controller Module
 
Each kit contains:
1 x RS485 Network Module
1 x RJ45 ethernet lead, 200mm long
1 x RJ45 ethernet lead, 300mm long
2 x RJ45 ethernet lead, 1200mm long
2 x M6 x 10mm mounting screws
1 x Installation guide