The QE20-FP2027Fused Power Distribution Board provides 4 separately fused 24VDC outputs for wiring to other equipment inside the QE20 panel or to equipment outside the cabinet that must be powered by the QE20.
The fuse board is supplied with 1A (20×5) fuses on each output, but each fuse may be replaced with a fuse of up to 3A rating for higher current loads. Do not use a fuse greater than 3A. The QE20 fuse board is usually mounted on the front of the 27A PSU that it derives its power from. As the load current is supplied by the PSU, and battery on mains failure, the load current must be included in the PSU and battery capacity calculations.
Each kit contains:
1 x Fused power distribution PCB
2 x 1000mm long terminated power leads, red and black
1 x M3 barrel nut
3 x Plastic PCB standoffs
1 x M3 x 6mm fixing screw
1 x Various cable ties and clips
1 x Installation guide
Related products
-
QE20 Master User Interface Module Kit
-
QE20 16 WIP Extender Module (8WIPs fitted)
-
QE20 WIP/Input Module Kit
-
QE20 2 x 4 Way 100V Splitter Module Kit
