Catalogue 2021

www.incitefire.com.au for technical information 105 PANEL, KEYPAD AND ACCESSORIES EL-35V A transformer for the EL-2 emergency light control panel. 35 VAC, 220 VA Input: 230 V ac Output: 35 V ac / 220 VA Protection class: IP44 Operational temperature: max. 40°C Wall installation: with three screws Manufacturing class: SS 4270203 (EN60742) Weight: 3.2 kg EL-PM An under-voltage monitoring device that constantly assesses the condition of a mains lighting circuit. When the lighting circuit is deemed faulty, the unit will provide a signal that can be relayed to the control equipment to initiate emergency luminaire activation. Triggers at 75% of the nominal lighting circuit supply DIN Rail mounted Power and output indications EL-CAB A connection cable for use between the EL-2 Emergency Light Control Panel and a PC/laptop. EL-KP is an emergency lighting control panel keypad for use with the EL-2 panel. The control panel is operated and interrogated through the compact backlit LCD graphical display of the keypad, which can show system status of the lighting units including battery charge and LED faults. One EL-2 control panel can support a total of 8 EL-KP keypad units, with up to a max of 48 panels on one system. EL-KP LIGHTING SYSTEM KEYPAD EL-TSB A common mounting base which is used to mount the Firescape range of luminaires and exit signs. Test switch Stainless steel contacts Accepts 2.5 mm 2 conductors Quick and easy ‘twist on’ connection of luminaires The EL-2 emergency light control panel features two lines, each line can accommodate 127 exit signs, route lights or I/O units. The EL-2 supplies the operational voltage to the light units during normal conditions, whilst also completing the continuous testing and monitoring of the equipment on the system. All monitored event information is saved in the memory of the control panel, and this can be accessed by a connected EL-KP keypad. NOTE: Must be used in conjunction with the EL-35V Transformer. EL-2 ADDRESSABLE CONTROL PANEL TCH-B200 A Hand Held Address Programmer designed to address the range of detectors and other addressable devices such as the YBO-BS Base Sounder. Designed to be light, robust and easy to use it operates from a single PP3 size 9v battery which can provide up to 8000 operations. TCH-B200: Includes CO detection Lightweight design Quick and reliable addressing Up to 8000 address settings from one battery Displays sensor analogue value