Catalogue 2021

www.incitefire.com.au for technical information 70 SAMPLING POINTS Sampling hole clip Sampling hole on aspirating pipe (clip). Available with different diameter according to the project data. Only for PVC and ABS pipes with 25 mm diameter. Packaging unit: 10 pieces SEC-Clip-REV PA Clip without hole for revision purpose. Packaging unit: 10 pieces Maintenance clip SEC-CLIP 2.0 PA SEC-CLIP 2.5 PA SEC-CLIP 3.0 PA SEC-CLIP 3.5 PA SEC-CLIP 4.0 PA SEC-CLIP 4.5 PA SEC-CLIP 5.0 PA SEC-CLIP 5.5 PA SEC-CLIP 6.0 PA SEC-CLIP 6.5 PA SEC-CLIP 7.0 PA 2.0 mm 2.5 mm 3.0 mm 3.5 mm 4.0 mm 4.5 mm 5.0 mm 5.5 mm 6.0 mm 6.5 mm 7.0 mm SEC-HEAT-3.0-ABS SEC-HEAT-3.5-ABS SEC-HEAT-4.0-ABS SEC-HEAT-4.5-ABS SEC-HEAT-5.0-ABS Sampling point with heating red blue green black brown Same as HEAT X.X PVC but in ABS. SEC-CCF-25-PVC SEC-CCF-25-ABS Cable connection fitting set for T-junctions of the tubes in deep-freeze rooms. Cable connection fitting SEC-WCU-535 For the introduction of the supply of the sampling point with heating into the aspirating tube, with internal clamps. For more details please see the guidelines for deep freeze- warehouses. Wiring connection unit Silicon litz wire Silicon litz wire 0.5mm² to connect the heating resistors in the heating nozzles HEAT X.X PVC/ABS. Order quantity must be a multiple of 100. SEC-SLW-0.5-wt SEC-SLW-0.5-bk (white) (black) SEC-SP-M20-PVC-Set SEC-SP-M20-ABS-Set Sampling point for ceiling ducts. Complete set incl. T-Piece, flex sampling pipe and sampling point. Sampling point for ceiling duct (Set) SEC-SP-TU6-PVC-Set To create the sampling point type “Capillary”. Complete capillary tube-set for the installation in sampling pipes TU 25 PVC. Incl. T-piece TP 25 PVC, reduction RE 25-6 PVC and capillary stub 1.5m. Sampling point Capillary (Set) SEC-SF-ABS Sampling-funnel for tubes TU 25 XXX. For sampling points exposed to the high air current like monitoring of server racks or air conditioners. Sampling -funnel Blazer100 - I Pipe Blazer200 - 2 Pipe Blazer300 - 3 Pipe Blazer400 - 4 Pipe ASD Maintenance Carrying out maintenance to the piping network of an aspiration system is a labour intensive job. To simplfiy the task simply install an automatic maintenance unit near the detector in the piping network and connect to an external air compressor. Two options are available : The Blazer or Securiton Automatic Blow Out Device. The automatic blow-out devices are used in areas which are polluted with a high amount of dust- and dirt particles. With the blow-out device, 1 sampling pipe is automatically blown out and cleaned, to prevent fault messages caused by clogged aspiration points and also to avoid false alarms. At the same time, the life-time of the “optical scattered light-detector“, located in the aspiration system is substantially increased. SEC-ADB-500 - I Pipe Automatic blow out device