Catalogue 2021

www.incitefire.com.au for technical information 87 Standard Features • Single loop address • Two independent sounder circuits • Each circuit fully monitored for Open and Short Circuit faults Product Overview A Marine Approved Analogue Addressable Manual Call Point fully compatible with Hochiki’s analogue addressable protocol and featuring plug-in wiring terminals for easy installation.Note – requires SR-BACKBOX if surface mounted (sold separately) MARINE HCP-EM Standard Features • Removable, High Performance chamber • Automatic Sensitivity Window Verification (ASWV) – Drift Compensation Technology • Remote Indicator output • Wide voltage range (12 ~ 30 V dc) • Low profile design with one piece outer cover Product Overview The SOC-E3NM is a Marine Approved Photoelectric Smoke Detector, which is fully compatible with the majority of existing Conventional Marine systems. The SOC-E3NM incorporates Hochiki’s unique High Performance photoelectric smoke chamber removing the need to use Ionisation SOC-E-3NM Standard Features • Single loop address • Two independent sounder circuits • Each circuit fully monitored for Open and Short Circuit faults • Each alarm circuit fused at 1 amp • Outputs are synchronised and can be driven continuously or intermittently • 24Vd.c. auxiliary power required • Features an integral short-circuit isolator Product Overview A Marine Approved Analogue Addressable Dual Sounder Controller , which has been designed to provide two sounder outputs (that can be driven separately) with full fault monitoring. The monitored input can be used for local power supply fault monitoring or as a general-purpose input. Features an integral short-circuit isolator. (SCI) CHQ-DSC/M (SCI) Standard Features • Loop powered • Up to 6 Conventional Detectors • Single loop address • Remote LED output • Fully monitored for Short and Open Circuit faults • Features an integral short-circuit isolator • Approved to MED by GL Product Overview A Marine Approved Analogue Addressable Single Zone Monitor designed to allow up to 6 marine approved conventional detectors to be interfaced to Hochiki’s analogue addressable system. Features an integral short-circuit isolator (SCI). CHQ-SZM/M (SCI) Standard Features • Class 1 performance as defined in BS EN54-10:2002 (range up to 25 m) • Single IR technology • Robust and slimdesign • Low current consumption • Twin LEDs for 360 degree viewing • Approved to MED by GL Product Overview A Marine Approved Conventional infra Red Flame Detector A Marine approved conventional Infra-Red Flame detector designed for internal use to detect large flames. The detection zone is a 90° cone and the detection range is up to and including 25 m. DRD-EM WCP1A is a Conventional Marine Approved Waterproof call-point based upon the industry standard KAC world series housing and features easy to install,push-fit wiring terminals. . Complies with EN54-11 • Push-fit terminals can accommodate up to a 2.5mm2 solid conductor. • Other colours available on request • IP rated to IP67