CHQ-SIM Instructions

2-3-0-1140/ISS3/NOV09 HOCHIKI ADDRESSABLE POWERED SINGLE INPUT MODULE INSTALLATION INSTRUCTIONS Product Covered: CHQ-SIM Introduction The CHQ-SIM has been designed to allow a single monitored input to be connected to the ESP loop. This provides a compact, low-cost option where the installation of the larger CHQ ‘Smart-Fix’ Range of Modules would be difficult. Fixing & Wiring The CHQ-SIM features two colour-coded flying leads, which must be wired as per the product label and as shown below in Fig 1. The unit also features a wiring terminal block for loop connection: Fig 1 CHQ-SIM Wiring The unit can be fixed to most fixing surfaces with two screws (not supplied) by utilising the two fixing holes (see Fig 1). End Of Line Devices The following End Of Line (EOL) devices are supplied with the CHQ-SIM and, if the device inputs are being utilised, should be fitted as follows: Fit a 10K Ω resistor to the input at the furthest end of the cable from the device. Fit a 470 Ω input activation resistor to the input cable. Programming The CHQ-SIM is addressable and features a programming connector to facilitate this. Connect a Hochiki TCH-B100 Hand Held Programmer to the CHQ-SIM using a PL-3 Programming Lead. Refer to the TCH-B100 Instructions for further details on programming addresses. The programmed address can be written on the device label. Please note that if the PCB is removed from the protective outer casing the EN54 approval is voided. CHQ-SIM 0832-CPD-1116 09 EN54-18:2005 Hochiki Europe (UK) Ltd Grosvenor Road, Gillingham Business Park, Gillingham, Kent, ME8 0SA, England Telephone: +44(0)1634 260133 Facsimile: +44(0)1634 260132 Email: sales@hochikieurope.com Web: www.hochikieurope.com Hochiki Europe (UK) Ltd. reserves the right to alter the specification of its products from time to time without notice. Although every effort has been made to ensure the accuracy of the information contained within this document it is not warranted or represented by Hochiki Europe (UK) Ltd. to be a complete and up-to-date description. Please check our web site for the latest version of this document.