HCP-E-ADD Instructions

2-3-0-635/ISS6/SEPT12 fig 4 fig 5 fig 6 – HCP-E(DPS) additional wiring fig 7 Replace the non-frangible element (yellow strip to top). Place the cover over lower half of unit so that the tabs inside the cover line up with the grooves on the sides of the main unit (see fig 7). Then slide the cover up back into place until it clicks shut (see fig 8). TESTING To test the call point insert the supplied test key into the aperture at the bottom of the unit until the lower cover opens. The non-frangible element will drop, thus simulating operation of the call point (see fig 1). To reset the unit remove the key and fig 8 slide the lower cover up (with the non-frangible element) back into place until it clicks shut (see fig 8). RESETTING AFTER ACTIVATION To reset the call point after it has been activated, insert the supplied test key into the aperture at the bottom of the unit until the lower cover opens, remove key. If a glass element has been used, remove cover, replace glass element and replace cover. Then slide the lower cover up (with the element) back into place until it clicks shut (see fig 8). HCP-E, HCP-EM, HCP-E(DPS) 0832-CPD-0601 07 EN54-11 Manual Call Points HCP-E(SCI) 0832-CPD-1238 09 EN54-11 Manual Call Points EN54-17:2005 Short-Circuit Isolators Hochiki Europe (UK) Ltd Grosvenor Road, Gillingham Business Park, Gillingham, Kent, ME8 0SA, England Telephone: +44(0)1634 260133 Facsimile: +44(0)1634 260132 Email: sales@hochikieurope.com Web: www.hochikieurope.com Hochiki Europe (UK) Ltd. reserves the right to alter the specification of its products from time to time without notice. Although every effort has been made to ensure the accuracy of the information contained within this document it is not warranted or represented by Hochiki Europe (UK) Ltd. to be a complete and up-to-date description. Please check our web site for the latest version of this document. Protocol specified in TI/006